Watts Premier FILTER-PURE Spezifikationen PDF herunterladen (Seite 4)

Page 4

Thank you for your purchase of a state of the art Watts Premier Reverse Osmosis (RO) water treatment system. Water

quality concerns are becoming more of a focus for the public. You may have heard about contaminants in the drinking water,

such as Arsenic, Perchlorate, Chromium, Cryptosporidium or Giardia. There may also be some local water issues such as

high levels of Lead and Copper. This Watts Premier water treatment system has been designed and tested to provide you

with high quality drinking water for years to come. The following is a brief overview of the system.

Your Reverse Osmosis System:

Osmosis is the process of water passing through a semi permeable membrane in order to balance the concentration of

contaminants on each side of the membrane. A semi permeable membrane is a barrier that will pass some particles like clean

drinking water, but not other particles like arsenic and lead.

Reverse osmosis uses a semi permeable membrane; however, by applying pressure across the membrane, it concentrates

contaminants (like a strainer) on one side of the membrane, producing crystal clear water on the other. This is why RO

systems produce both clean drinking water and rinse water that is ﬂ ushed from the system. This reverse osmosis system also

utilizes carbon block ﬁ ltration technology, and can therefore provide a higher quality drinking water than carbon ﬁ ltration

systems alone.

Your system is a three or four stage RO which is based upon separate treatment segments within the one complete water

ﬁ ltration system. These stages are as follows:

Stage 1 (Not in three stage units) – Sediment ﬁ lter, recommended change 6 months.

The ﬁ rst stage of your RO system is a ﬁ ve micron sediment ﬁ lter that traps sediment and other particulate matter

like dirt, silt and rust which affect the taste and appearance of your water.

Stage 2 – Carbon ﬁ lter, recommended change 6 months.

The second stage contains a 5 micron carbon block ﬁ lter. This helps ensure that chlorine and other materials that

cause bad taste and odor are greatly reduced.

Stage 3- Membrane, recommended change 2-5 years.

Stage three is the heart of the reverse osmosis system, the RO membrane. This semi permeable membrane will

effectively take out TDS, Sodium and a wide range of contaminants such as Percholate, Chromium, Arsenic, Copper,

Lead as well as Cysts, such as Giardia and Cryptosporidium. Because the process of extracting this high quality

drinking water takes time, your RO water treatment system is equipped with a storage tank.

Stage 4- Carbon post ﬁ lter, recommend change 6 - 12 months.

The ﬁ nal stage is a high quality carbon ﬁ lter. Drinking water enters this ﬁ lter after the water storage tank and it is

used as a ﬁ nal polishing ﬁ lter.

Note: Filter life may vary based upon local water conditions or use patterns.

System Maintenance

Just because you can not taste it, does not mean that it is not there. Contaminants such as Lead, Chromium and Arsenic are

undetectable to the taste. Additionally, over time if you do not replace the ﬁ lter elements, other bad tastes and odors will

be apparent in your drinking water.

This is why it is important to change out your ﬁ lters at the recommended intervals as indicated in this system manual. When

replacing the ﬁ lter elements, pay special attention to any cleaning instructions. Should you have any further questions please

refer to our website at www.wattspremier.com or call our customer service dept. at 1-800-752-5582.

Available From:

freshwatersystems.com

serving you since 1989

CLICK HERE

1 2 3 4 5 6 7 8 9 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Watts Premier FILTER-PURE Spezifikationen Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserspender Watts Premier FILTER-PURE